A6 Quattro Sedan V6-3.2L (BKH) (2005)
/Page-3696004.png)
-
Slide back protective boot.
-
Guide the assembly/removal tool (T40018) behind the joint.
Guide pins - 1 - must contact joint.
-
Bring installation device (T40018) into contact with joint by turning knurled thumb screws - 2 -.
‹› Secure the joint without play in the assembly/removal tool (T40018).
‹› Tighten the screws - 2 - by hand only.
-
Install the slide hammer (VW 771) in the assembly/removal tool (T40018).
