A6 Quattro Sedan V8-4.2L (ART) (2000)
Timing Belt: Service and Repair
Toothed Belt, Removing and Installing
Toothed belt, removing and installing
Special tools and equipment:
-
Spring pin from 2024A
-
Pin wrench 3212
-
Open end wrench 3312
-
Wrench 3078 (22 mm)
-
Clamping bolt 3242
-
Camshaft bar T40005
-
Puller T40001
-
Torque wrench VAG 1410
-
Socket attachment VAS 5122
-
Tensioning roller key T40009
-
Pin T40011
Removing
-
Remove engine cover-arrows-.
-
Remove cylinder head cover-1- and -2-.
-
Disengage spring clips at toothed belt cover.
-
Remove toothed belt cover.
-
Remove noise insulation -arrows-.
-
Removing and installing ribbed belt. See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair
-
Remove ribbed belt pulley for viscous fan.