Audi Workshop Service and Repair Manuals > A6 Quattro Sedan V8-4.2L (BVJ) (2007) > Engine, Cooling and Exhaust | Engine | Engine Lubrication | Oil Pan, Engine | Component Information | Service and Repair | Oil Pump and Oil Pan Lower Section Assembly Overview

Page 5

‹› Thickness of sealant beads: 2.5 mm.

CAUTION!
Risk of plugging oil pump strainer with excess sealant. Do not apply sealant bead thicker than specified.

‹› The oil pan (upper part) must be installed within 5 minutes after application of sealant.

Position lower part of oil pan and tighten bolts => [ Upper part of oil pan, tightening sequence ] See: Oil Pan Upper Section Assembly Overview

The rest of installation is in reverse order of removal, note the following:

Audi Workshop Service and Repair Manuals