A6 Quattro Sedan V8-4.2L (BVJ) (2007)
/Page-2378001.png)
Exhaust Pipe: Procedures
Tail Pipes, Aligning
Work procedure
‹› Tightening Specification => [ Muffler Assembly Overview ] See: Muffler/Service and Repair/Muffler Assembly Overview.
-
Check distance of end pipes at left and right to bumper cover:
‹› Dimension - x - left = dimension - x - right.
If necessary, correct dimension "x" as follows:
-
Loosen threaded connections - arrow - of brace between exhaust pipes.
-
Adjust distance between rear mufflers.
-
Tighten bolts.
-
Check distances - y - and - z - of end pipes to bumper cover: