A6 Quattro Sedan V8-4.2L (BVJ) (2007)
Transmission Shift Position Indicator Lamp: Service and Repair
Selector Lever Transmission Range (TR) Position Display Y26, Removing And Installing
Removing
-
Place selector lever in position "N".
CAUTION:
-
Switch off all electrical components.
-
Switch ignition off and remove ignition key.
-
Unclip mounting frame for selector lever boot - 1 - from center console and lift it upward - arrows -.
-
Fold selector lever boot upward.
-
Release retaining spring - 2 - and remove Selector Lever Transmission Range (TR) Position Display Y26 - item 1 - - arrow -.
-
Disconnect electrical harness connector.
Installing
Installation is performed in the reverse order of removal.