A6 Quattro Sedan V8-4.2L (BVJ) (2007)
Engine Control Module: Service and Repair
Engine Control Module, Removing and Installing
Engine Control Module, Removing and Installing
Special tools, testers and auxiliary items required
‹› Heat gun.
Removal
-
Remove the rubber seal - 1 - for plenum chamber cover- 2 -.
-
Remove plenum chamber cover - 2 -.
-
Remove the windshield wiper arm caps.
-
Loosen the wiper arm nuts - arrows -.
-
Remove the wiper arms by rocking slightly with an up and down motion.
-
Remove the wiper arm nuts and wiper arms.
‹› If wiper arms cannot be removed, use a standard puller.
-
Remove cowl grille screws - arrows -.
-
Remove the cowl grille - 1 - from the windshield.