Workshop Manuals Factory service & repair Audi
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Instrument Panel, Gauges and Warning Indicators16 Lighting and Horns17 Windows and Glass
Audi A6 Quattro Sedan (4F2) V8-4.2L (BVJ) (2011)01 · Relays and Modules
01 · Diagnostics

Battery - Testing/Charging On BDM Equipped Vehicles (Battery Control Module)

Make
Audi
Model
A6 Quattro Sedan (4F2)
Engine
V8-4.2L (BVJ)
Year
2011
Section
Battery Control Module › Technical Service Bulletins › Battery - Testing/Charging On BDM Equipped Vehicles
Relays and ModulesBattery - Testing/Charging On BDM Equipped Vehicles · page 1 of 3
Battery - Testing/Charging On BDM Equipped Vehicles (Battery Control Module) – Audi A6 Quattro Sedan (4F2) V8-4.2L (BVJ) (2011)

Battery Control Module: Technical Service Bulletins
Battery - Testing/Charging On BDM Equipped Vehicles

27 Battery testing and charging - vehicles with BDM (J367)

27 10 05 

2023282/1 

May 5, 2010

Affected Vehicles

Condition

Battery testing and charging for vehicles equipped with a Battery Data Manager (BDM - J367).

Technical Background

When the InCharge 940 is used as a battery charger in auto mode, it performs a battery condition test and may prematurely fail the battery if the charging
takes place at the jumper posts in the engine compartment. This is due to the added resistance in the system between the battery and jumper posts. When
the InCharge 940 is used as a battery charger in manual mode, the battery condition test is not performed.

Production Solution

Not applicable.

Service

TESTING THE BATTERY

VAS scan tool:

Follow Guided Fault Finding battery test plan in service work.

CHARGING THE BATTERY

Midtronics INC-940 diagnostic charging station:

Connect the charging station - auto mode

1. Connect the InCharge 940 positive cable clamp to the positive battery post.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

The same page in: A6 Quattro Sedan V6-3.0L SC (CCAA) (2010), A6 Quattro Sedan (4F2) V8-4.2L (BVJ) (2011), A6 Quattro Sedan (4F2) V8-4.2L (BVJ) (2011), A6 Quattro Sedan V6-3.0L SC (CCAA) (2010), A6 Quattro Sedan V6-3.0L SC (CCAA) (2010), A6 Quattro Wagon V6-3.0L SC (CCAA) (2010), A6 Quattro Wagon V6-3.0L SC (CCAA) (2010), A6 Quattro Wagon V6-3.0L SC (CCAA) (2010), A6 Sedan (4F2) V6-3.2L (CALA) (2011), A6 Sedan (4F2) V6-3.2L (CALA) (2011), A6 Sedan (4F2) V6-3.2L (CALA) (2011).

Parts & tools for this job For 2011 Audi A6 4.2L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.