A6 Quattro Wagon V6-2.8L (AFC) (1995)
Door Locks: Service and Repair
Door lock, assembly
1 - Locking rod
^ Removing, unclip at lock
2 - Locking rod for lock cylinder
^ Installing => Fig. 1 (below)
3 - Outer door handle
^ Removing lock cylinder. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Handle/Front Door Exterior Handle/Service and Repair
4 - Door handle
^ Removing. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Handle/Front Door Exterior Handle/Service and Repair
5 - Screw
^ 5.0 Nm (44 in lb)
6 - Lock clip
^ To remove, twist toward rear (opposite driving direction)
7 - Lock rod
^ Installing => Fig. 1 (below)
8 - Release mechanism clip
^ Unhook lock operating rod/locking rod for lock cylinder by sliding sleeve downward
9 - Door lock
^ Removing:
-
Remove front door trim panel. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair
-
Remove door component carrier. See: Doors, Hood and Trunk/Doors/Front Door/Service and Repair
-
Unhook locking rod, lock operating rod and locking rod for lock cylinder
-
Unscrew screws -11-
-
On vehicles with central door locking, pull connecting hose off door activator
-
Unhook Bowden cable for remote control => Fig. 2 (below)