A6 Quattro Wagon V6-2.8L (AFC) (1995)
Coolant Line/Hose: Service and Repair
LEGEND
1
Large Coolant Pipe
2
Bleed Screw
3
Engine Coolant Temperature (ECT) Sensor
4
Bolt
5
Small Coolant Pipe
6
Bolt
7
Electronic Engine Coolant Temperature (ECT) Thermal Switch
8
Bolt
NOTE: During removal and installation procedures, refer to the component location illustration above and component notes below.
COMPONENT NOTES
Bleed Screw (2)
-
Tighten to: 15 Nm (11 ft. lbs.).
ECT (3)
-
Tighten to: 15 Nm (11 ft. lbs.).
Bolt (4)
-
Tighten to: 10 Nm (7 ft. lbs.).
Bolt (6)
-
Tighten to: 20 Nm (15 ft. lbs.).
Bolt (8)
-
Tighten to: 20 Nm (15 ft. lbs.).