A6 Quattro Wagon V6-2.8L (AFC) (1995)
Ignition Reference Sensor
2.
Remove Crankshaft Position Sensor located on the left side of engine block near oil pan.
^ Notch in crankshaft for TDC can be seen or felt through CKP Sensor hole.
Crankshaft Positioning Tool #3242
3.
Insert crankshaft positioning fixture #3242 into hole of removed CKP Sensor and tighten slightly.
4.
Remove Engine Speed Sensor heat shield.
5.
Remove Engine Speed Sensor.
6.
Loosen Engine Speed Sensor mounting bracket bolts.