A6 Quattro Wagon V6-2.8L (AFC) (1995)
Ignition Switch Lock Cylinder: Service and Repair
Steering Lock Housing and Lock Cylinder, Removing and Installing
Removing
-
Remove steering wheel and steering column switches.
-
Remove trim screws -2-.
-
Remove trim molding -1-.
-
Remove instrument cluster mounting screws (arrows).
-
Carefully pull instrument cluster from instrument panel.
-
Disconnect electrical connectors and remove instrument cluster.
-
Remove ignition and starter switch connector.
-
Remove bowden cable cover for shift lock.
-
Using a screwdriver, pry off bowden cable mounting clips.
-
Unhook bowden cable.
-
Remove Torx (T30) screw (arrow).
Tightening torque: 7 Nm (62 in lb)
-
Remove steering column mounting bolts (arrows).