A6 Quattro Wagon V6-2.8L (AFC) (1995)
Available shims S3
Note: If the required thickness of shim S3 is greater than the largest shim listed in the table, two shims that combine to produce the required
thickness may be installed.
Determining Thickness Of Shim S4
-
S4 = Stotal - S3
Example:
-
The tolerances in nominal shim sizes make it possible to choose a shim with the precise thickness required for S4.
-
Available shims S4
Note: If the required thickness of shim S4 is greater than the largest shim listed in the table, two shims that combine to produce the required
thickness may be installed.
Checking Measurements
Checking dimension r
-
Install pinion and hollow shaft with measured size of shims S3 and S4 and turn several times in both directions.