A6 Quattro Wagon V6-2.8L (AFC) (1995)
/Page-2407001.png)
Position Sensor/Switch: Service and Repair
REMOVAL
NOTE: The switch for the differential lock mechanism is installed in the cover of the rear center console with a trim panel.
-
Carefully pry switch with trim panel from cover.
-
Disconnect harness connectors.
-
Insert small screwdriver between switch -A- and printed circuit board -B- (arrow).
-
Turn screwdriver to release switch from front catch (arrow).
-
Remove switch from trim panel.
Printed circuit board -B- should be removed from trim panel along with connector housing
INSTALLATION
-
Install in the reverse order of removal.
