A6 Quattro Wagon V6-3.0L (AVK) (2002)
-
Remove trim caps -1
-
Unscrew both guide pins and remove from brake caliper.
-
Remove brake caliper housing and lay to one side so that the weight of the brake caliper does not stress or damage the brake hose.
-
Take brake pads out of brake caliper housing or from brake carrier.
Use only methylated spirits to clean brake caliper housing.
Installing
-
Press back piston.
Note: Press piston back into caliper housing using resetting tool before inserting new brake pads. Before pushing back the piston, draw off brake
Fluid out of the brake Fluid reservoir with a bleeder bottle. Otherwise, especially if reservoir has been topped off, Fluid will overflow and cause
damage.
WARNING: Brake fluid is poisonous and must not be siphoned by mouth through a hose.