A6 Quattro Wagon V6-3.0L (AVK) (2002)
4. Archive the VAS5051 diagnostic log and oil measurement test sheets in the vehicle service file.
5. Advise the customer that if the low oil level warning light comes on before the 630 mile test is finished, the vehicle must be taken directly to the
dealership for part # 2 of the oil consumption test, regardless of the miles accumulated. The customer should not add any oil.
6. When the customer returns the vehicle to the dealership after a minimum of 630 miles, complete part # 2 of the oil consumption test.
7. If the GFF printout from part # 2 of the test indicates an oil consumption rate greater than 0.85 quarts per 1000 miles and the vehicle is within the
New Vehicle Limited Warranty, authorization from the Audi Technical Assistance Center (TAC) is required to perform any repairs. You must
attach the GFF log to the TAC contact.
NOTE:
The GFF oil consumption test can also be used for older engines not listed in the GFF test plan since the test and procedure are identical for all
engines. Please use any current engine code.
Warranty
If the result of the test is that the oil consumption is within the permissible tolerance, another oil consumption test on the same engine will not covered
under Warranty within the next 25k miles.
All warranty claims submitted for payment must be in accordance with the Audi Warranty Policies and Procedures Manual. Claims are subject to review
or audit by Audi Warranty.
Required Parts and Tools
Digital scale with 15 kilogram capacity and 5 gram accuracy, which can be obtained locally if necessary. Adam Equipment Inc offers a Model CPW plus
15 and will provide a 20% discount for this item to our dealer network, plus freight. They may be contacted at:
Adam Equipment Inc
26 Commerce Drive
Dandury, CT 06810
Additional Information
All parts and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service
manuals for the latest information.