A6 Quattro Wagon V6-3.0L (AVK) (2002)
Fig. 7 Installing top spring seat
-
Adjust angle scale (arrow) of clamping device (1752/2) to 0
-
Install top spring seat, washer, and shock absorber mount.
-
Bring upper spring seat into 11 position using adjusting gauge 1 752/8.
-
On the adjusting gauge (1752/8) the 11° setting has "left front "or" right front" markings!
-
Make sure that the left and right side 11° positions of the spring seat are symmetrical!
Fig. 8 Installation position of top spring seat
-
Threaded bolts in top spring seat are rotated 11 to the axis of bolt-1- of fork head on shock absorber.
F = direction of travel
R = right side spring seat
L = left side spring seat
A = 11° +2°
-
Holes (B) of bottom spring seat face middle of vehicle.