A6 Quattro Wagon V6-3.0L (AVK) (2002)
Fig. 7 Pressing off large tapered roller bearing inner race from drive pinion
A - 17/2 Kukko separating tool 22- 1 15 mm
Fig. 8 Pressing large tapered roller bearing inner race onto drive pinion
Heat inner race to approximately 100°C, place on and then press on.
CAUTION: Wear protective gloves.
Fig. 9 Pressing in double tapered roller bearing outer race
-
Before installing, install drive pinion shim S3 determined in earlier step.
Note: On 3253/4 pressure disc, marking "Open" points toward nut on installation device