A6 Quattro Wagon V6-3.0L (AVK) (2002)
Liftgate Window Glass: Service and Repair
Preparing For Window Installation
Preparing For Window Installation
Undamaged Removed Window
NOTES:
-
When reusing an undamaged window, smoothly cut back the adhesive material on the glass and flange using VAG1510 electric knife and
VAG1510/8 scraper; do not completely remove residue.
-
The remaining material serves as a base for the new adhesive.
-
Keep the adhesive area free from dirt and grease.
-
Do not prime or use a cleaning solution on the adhesive surface.
NOTE: If the window flange becomes damaged during removal, repair the paint structure and if necessary carry out corrosion protection
measures.
New Glass
NOTES:
-
The circumference of the adhesive area (the edge of the primer to the edge of the glass) is identified by two dotted lines - 2 -.
-
The primer and the adhesive must be applied in the center of these two lines.
-
Clean adhesive area of glass all around using glass cleaner D 009 401 04.
CAUTION: The ceramic area on the glass is not a primer. Area must be primed before applying adhesive material.
-
Bond strips - 3 - on glass side of dome at left and right.
CAUTION:
-
Avoid contact between primer/adhesive bead and collector rail of rear defroster during primer application.
-
With replacement parts, an adhesive plug is supplied next to the collector rail for this purpose.