audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Air Intake Unit|Removal and Installation|Page 16089 > < Air Intake Unit|Removal and Installation|Page 16087
Page 4
background image

20

Left Footwell Door Motor (V108)

‹› With Potentiometer in the Left Footwell Door Control Motor (G139)

‹› In vehicles with the "Basic" version of the Climatronic Control Module (J255) A/C control head, there is no control motor at this location. The

Left Footwell Door Control Motor (V108) in these vehicles is installed at the A/C unit to the right (the two doors are connected via a coupling rod)
=> [ Connection between Left and Right Footwell Door, Basic A/C Unit ] See: Air Door/Air Door Cable/Service and Repair/Connection between
Left and Right Footwell Door, Basic A/C Unit.

‹› This control motor is only installed in vehicles with the " Comfort" version of the Climatronic Control Module (J255) A/C control head.

-

In vehicles with the "Basic" version of the Climatronic Control Module (J255)A/C control head, both footwell doors are operated by the Left
Footwell Door Control Motor (V108) (installed at the A/C unit to the right).

‹› Removing and installing => [ Left Footwell Door Motor ] See: Air Door/Air Door Actuator / Motor/Service and Repair/Left Footwell Door

Motor

21

Center Outlet Temperature Sensor (G191)

‹› Removing and installing => [ Center Vent Temperature Sensor ] See: Discharge Air Temperature Sensor / Switch/Service and Repair/Center

Vent Temperature Sensor

‹› The Center Outlet Temperature Sensor (G191) is being gradually discontinued as of model year 2006, therefore pay attention to correct

assignment of the Climatronic Control Module (J255) A/C control head (different versions)

22

Air Duct To Center Instrument Panel Vents

‹› The installed grille provides improved swirling and mixing of the flowing air.

‹› This air duct is available as a replacement part with and without opening for mounting of the Center Outlet Temperature Sensor (G191). Close

mounting opening or open mounting opening by breaking out the plastic at the locations marked, depending on the vehicle equipment 

23

Connecting Element (Shaft/Control Motor)

‹› Mark before removing (risk of interchange)

‹› Removing and installing => [ Connecting Elements to A/C Unit Doors ] See: Air Door/Service and Repair/Connecting Elements to A/C Unit

Doors

24

Center Vent Adjustment Motor (V102)

‹› With Potentiometer in the Central Vent Control Motor (G138)

‹› Removing and installing => [ Center Vent Adjustment Motor ] See: Air Door/Air Door Actuator / Motor/Adjustments

25

Connecting Element (Control Motor/Coupling Rod)

‹› Removing and installing => [ Indirect Ventilation Flap Motor ] See: Air Door/Air Door Actuator / Motor/Service and Repair/Indirect

Ventilation Flap Motor

‹› Only installed in vehicles with the "Comfort" version of the Climatronic Control Module (J255) A/C control head.

26

Coupling Rod

‹› Removing and installing => [ Indirect Ventilation Flap Motor ] See: Air Door/Air Door Actuator / Motor/Service and Repair/Indirect

Ventilation Flap Motor

‹› Only installed in vehicles with the "Comfort" version of the Climatronic Control Module (J255) A/C control head.

27

Connecting Element (Shaft/Coupling Rod)

‹› Removing and installing => [ Indirect Ventilation Flap Motor ] See: Air Door/Air Door Actuator / Motor/Service and Repair/Indirect

Ventilation Flap Motor

‹› Only installed in vehicles with the "Comfort" version of the Climatronic Control Module (J255) A/C control head.

Air Intake Unit|Removal and Installation|Page 16089 > < Air Intake Unit|Removal and Installation|Page 16087