A6 Sedan V6-2.8L (AHA) (1998)
Front Door Panel: Service and Repair
Memory Switch Unit, Removing and Installing
Memory Switch Unit, Removing And Installing
Removing
-
Remove door trim.
-
Remove hinged pocket assembly.
-
Detach wiring - 4 - from clips - 5 - (2x).
-
Using a screwdriver, press in retaining lugs - 2 - (2x) and at the same time push out memory switch unit - 1 -.
-
Disconnect connector - 7 - from memory switch unit - 1 -.
Installing
-
When installing, make sure that wiring - 4 - is located in guide - 6 -.