A6 Sedan V6-2.8L (AHA) (1998)
Trim Panel: Service and Repair
Intermediate Piece At B-Pillar and Coat Hook, Removing and Installing
Intermediate Piece At B-pillar And Coat Hook, Removing And Installing
1
-
Intermediate piece
-
Pry off cap - 3 -.
-
Remove bolt - 2 -.
-
Pull intermediate piece - 1 - up and out.
2
-
Bolt
-
Tightening torque: 3.5 Nm (31 in lb)
-
Self-locking
-
Always replace
-
Always clean threaded holes for bolts (e.g. using a tap)
-
For loose (threaded) inserts, tighten inserts using pliers.
3
-
Cover
4
-
Bolt
-
Tightening torque: 3.5 Nm (31 in lb)
-
Self-locking
-
Always replace
-
Always clean threaded holes for bolts (e.g. using a tap)
-
For loose (threaded) inserts, tighten inserts using pliers.
5
-
Bolt
-
Tightening torque: 2 Nm (18 in lb)
6
-
Coat hook
-
Open coat hook - 6 -.
-
Remove bolt - 5 -.