A6 Sedan V6-2.8L (AHA) (1998)
-
To ease assembly, push longitudinal rods back to first transverse rod
-
Using upholstery clips, install transverse rods first, then longitudinal rods
Fig. 1 Removing head restraint guides
1
-
Head restraint guide
2
-
Retainer tab
3
-
Screwdriver or upholstery needle Max. width 2 mm (25/32 in.)
4
-
Hole
-
Insert screwdriver or upholstery needle -3- (max. width 2 mm or 0.079 in.) into hole -4- (opposite retaining clip for head restraint guide).
-
Pry screwdriver -3- in direction of arrow -A-, press retainer tab -2- in direction of arrow -B- and remove head restraint guide -1-.