A6 Sedan V6-2.8L (AHA) (1998)
-
Secure container of VAG1924 ATF filler tool high up on vehicle as possible.
-
Raise vehicle.
-
Place VAG13O6 drip tray under transmission
WARNING! Wear protective glasses.
-
Once an ATF temperature of 35°C is reached remove ATF check plug -2- and drain excess ATF if necessary.
-
It ATF exits from the ATF filler plug hole be the ATF reaches 40°C, the ATF level is C
Note:
-
ATF check plug must be closed again by 45°C (For warm countries 50°C) at the latest.
-
Add ATF if no ATF has exited from the ATF check plug hole by 40°C.
-
Insert VAG1924 ATF filler tool into an open -4- in the protective cap, but do not knock cap upward.
-
Fill with ATF using VAG1924 ATF filler tool ATF exits from the check hole.