A6 Sedan V6-2.8L (AHA) (1998)
/Page-2385006.png)
-
Secure container of VAG1924 ATF filler tool as high up on vehicle as possible.
-
Raise vehicle.
Notes:
^
Observe disposal regulations.
^
Engine must not be started without ATF and vehicle must not be towed!
-
Place VAG1306 drip tray under transmission.
-
Remove ATF drain plug -1- and drain ATF.
Note: Drain plug and oil seal must both be replaced.
-
Tighten ATF drain plug to 40 Nm
-
Remove ATF check plug -2-.
-
Insert VAG1924 ATF filler tool into an opening -4- in the protective cap, but do not knock cap upward.
