A6 Sedan V6-2.8L (AHA) (1998)
3 - Connection designation - relay control module on relay panel
Shows the individual terminals in a multi-point connector.
For example: contact 24 on terminal 4 on relay panel.
4 - Diagram of threaded pin on relay panel
White circle shows a detachable connection.
5 - Fuse designation
For example: S228 = Fuse number 228, 15 amps, in relay panel
6 - Reference of wire continuation (current track number)
Number in frame indicates current track where wire is continued.
7 - Wire connection designation in wiring harness
Location of wire connections are indicated in the legend.
8 - Terminal designation
Designation which appears on actual component and/or terminal number of a multi-point connector
9 - Ground connection designation in wire harness
Locations of ground connections are indicated in legend.
10 - Component designation
Use legend at bottom of page to identify the component code.
11 - Component symbols See: Diagrams/Diagram Information and Instructions/Symbols Used In Wiring Diagrams
12 - Wire cross-section size (in mm2) See: Diagrams/Diagram Information and Instructions/Wire Size Conversion and wire colours See:
Diagrams/Diagram Information and Instructions/Wire Color Code Identification
13 - Component symbol with open drawing side
Indicated component is continued on another wiring diagram.
14 - Internal connections (thin lines)
These connections are not wires. Internal connections are current carrying and are listed to allow tracing of current flow inside components and wiring
harness.
15 - Reference of continuation of wire to component
For example: Control module for anti-theft immobilizer J362 on 6-Pin Connector, terminal 2
16 - Relay panel connectors
Shows wiring of multi-point or single connectors on relay panel.
For example: S3/3 - Multi-point connector S3, terminal 3
17 - Reference of internal connection continuation
Letters indicate where connection continues on the previous and/or next page.