A6 Sedan V6-2.8L (AHA) (1998)
-
Check wiring of 8-pin connector for short circuit between wires, according to wiring diagram.
- Connector terminal 1 to ECM/test box socket 59
- Connector terminal 1 to ECM/test box socket 74
- Connector terminal 1 to ECM/test box socket 67
- Connector terminal 2 to ECM/test box socket 67
- Connector terminal 2 to ECM/test box socket 74
- Connector terminal 7 to ECM/test box socket 74
- Specified value: infinity Ohms
If wiring is OK:
-
Carry out adaptation of throttle valve control module to ECM.
-
Check readiness code. If Diagnostic Trouble Code (DTC)memory has been erased, or ECM was disconnected, generate new readiness code.