A6 Sedan V6-2.8L (AHA) (1998)
/Page-5503005.png)
-
Connect connector -B- to connector -A- at wiring harness.
-
Connect connector -C- to transmission Vehicle Speed Sensor (VSS) -G38-.
Only for transmissions with hydraulic control E17
-
Connect connector (arrow) to transmission Vehicle Speed Sensor (VSS) -G38-.
All
-
Install securing clip onto the wiring harness connector (arrow).
-
Install oil strainer.
-
Install oil pan.
-
Top up ATF.
Tightening torque
Valve body to transmission housing (in sequence from inside bolts to outside bolts) 8 Nm (70 inch lbs.)
