A6 Sedan V6-2.8L (AHA) (1998)
-
Loosen mounting parts -3- and -4- and remove rear part of noise insulation.
-
Place container beneath transmission.
WARNING! Wear safety goggles.
-
Once an ATF temperature of 35°C is reached, remove ATF check plug -B-.
Notes:
when opening the plug, approx. 5 cl ATF flows out first from the inner oil level pipe.
The ATF level is correct if, at an ATF temperature of between 35°. and 45° (For hot countries 50°C), a small amount of fluid is still discharged at the
ATF inspection plug (owing to the rise in fluid level caused by increased temperature).
-
Replace ATF check plug. 4
-
Tightening torque: 20 Nm
Note:
ATF check plug must be closed again by 45° (For hot countries 50°C) at the latest
Add ATF if no ATF has exited from the ATF check plug hole by 40°C.
Filling up ATF
Requirement:
-
Engine continues to run in idle.