A6 Sedan V6-2.8L (AHA) (1998)
-
Instead of using T10065/2 special tool, T10065/3 special tool must be used depending on the version!
Press triple roller star onto drive axle
-
Chamfer on star faces toward shaft, it facilitates assembly.
-
Place triple roller connections on shaft according to markings and drive on until impact.
-
This depiction is only valid for drive axles with a conical shape at the end (arrow)!
-
Use special tools shown in illustration.
-
T10065/2 special tool must not protrude on roller body
-
This depiction is only valid for drive axles with a cylindrical shape at the end (arrow)!
-
Use special tools shown in illustration.
-
T10065/3 special tool must not protrude on roller body