A6 Sedan V6-2.8L (AHA) (1998)
Windshield: Removal and Replacement
Windshield, Removing
Windshield, Removing
-
Remove wiper arms.
-
Remove cowl panel trim.
-
Pull left and right water deflectors out from retaining strips (from bottom upward).
-
Remove sun visors on left, center and right.
-
Remove interior rear-view mirror.
-
Remove upper trim panels of A-pillars.
-
Pierce hole in adhesive sealing material from inside of vehicle using awl at bottom-left of windshield.
-
Pull cutting cord through adhesive sealing material into inside of vehicle using awl.
-
Lay cutting cord underneath and all around inside of windshield.
-
Secure end of cutting cord at bolt for securing front wiper arms.
-
Insert VAG1474/13 protective foil between windshield and dash panel.