A6 Sedan V6-2.8L (AHA) (1998)
Windshield: Removal and Replacement
Windshield, Installing
Windshield, Installing
-
After performing preparatory work, cut tip off nozzle as shown.
-
Dimension -a- = 12 mm (approx. 1/2 in.)
-
Width of adhesive bead = 8 mm (approx. 5/16 in.)
-
Arrow indicates direction of application
NOTE: The cross-section of the adhesive bead depends on the dimension of the opening in the nozzle tip and the rate of application.
-
Apply adhesive sealing material around circumference of windshield as shown.
Spacing between center of adhesive bead and edge of windshield varies.
-
Using two double suction cups, install windshield in windshield opening.
CAUTION: The window must be installed within 15 minutes for best adhesive results.
-
Align windshield at sides.
Spacing between edge of windshield and roof frame must be 5.5 mm ± 0.5 mm (0.217 in. ± 0.019 in.).