A6 Sedan V6-2.8L (AHA) (1998)
-
Insert wiper arm -2- into windshield wiper adjuster special tool 3358 B and secure with locking screw -3-.
-
Adjust wiper arm to specified angle using a 24 mm wrench -1- as shown (arrows).
Specifications See: Wiper Blade Park Position, Adjusting
-
Loosen locking screw -3- and remove wiper arm from adjuster tool.
-
Re-install wiper arm -2- in adjuster tool 3358 B, tighten locking screw again and recheck angle.
-
Compare indicated angle with specified value See: Wiper Blade Park Position, Adjusting
-
If necessary repeat procedure until angle is as specified.
-
Remove adjustment tool and install wiper blade.