A6 Sedan V6-2.8L (ATQ) (2000)
Parking Assist Distance Sensor: Service and Repair
Removing (vehicles with trailer hitch)
NOTE:
-
The ultrasound sensors are accessible from below without removing the bumper.
-
To remove the sensors to the inside, a second person is needed to help.
-
Disconnect the harness connector -1- from sensor.
-
Push both locks sideways (arrow).
-
The second person must push the sensor to the inside.
-
Remove the ultrasound sensor from inside.
Installing
-
Install in reverse order of removal.
Removing (vehicles without trailer hitch)
-
Remove bumper.
-
Disconnect the harness connector -1- from sensor.
-
Push both locks sideways (arrow).
-
Push the sensor from outside inward.
-
Remove the ultrasound sensor from inside.
Installing
-
Install in reverse order of removal.