A6 Sedan V6-2.8L (ATQ) (2000)
![background image](/audi/a6_sedan/v6-2.8l_(atq)/Page-8590001.png)
Trunk / Liftgate Motor: Service and Repair
Rear Lid Lock Motor, Removing And Installing
-
Unclip operating rod - 3 -.
-
Remove screws - 2 - (2x).
Tightening torque: 1.2 Nm (11 in.lb)
-
Disconnect harness connector from motor - 1 -.
NOTES:
-
Do not unclip operating rod - 4 - from fulcrum lever - 5 -.
-
Make sure the harness connector is connected to the motor before installation.