A6 Sedan V6-2.8L (ATQ) (2000)
Stabilizer Link: Service and Repair
Connecting Link For Stabilizer Bar, Removing And Installing
Removing
-
Remove wheel.
-
Remove brake carrier mounting bolts -1-.
1. Connecting link
-
Remove connecting link -1- from stabilizer bar.
1. Axle beam
4. Eccentric bolt
-
Remove bracket -3- for stabilizer bar -2-.
-
Remove bolt -3- for suspension strut to lower control arm -1-.
1. Lower control arm
2. Parking brake cable
3. Bolt for suspension strut to lower control arm
A. Retaining clip for parking brake cable
-
Move wheel bearing housing together with lower control arm downward.