A6 Sedan V6-2.8L (ATQ) (2000)
4. Hex bolt, 10 Nm
5. Backing plate
6. ABS wheel speed sensor pull out to remove
-
Install drive axle before installing wheel speed sensor
-
Push into clamping sleeve up to stop to replace
7. Clamping sleeve
-
Always replace
-
Left and right sides are identical
-
before inserting, grease hole in wheel bearing housing with copper paste
-
Push into wheel bearing housing up to stop
Special Tools and Equipment
-
VW401 thrust plate
-
VW402 thrust plate
-
VW412 punch
-
416 B pipe piece