A6 Sedan V6-3.2L (BKH) (2007)
Fluid Filter - CVT: Service and Repair
01J, Continuously Variable Transmission (CVT)
ATF additional filter, removing and installing 01J, Continuously Variable Transmission (CVT)
Note:
^
Observe rules of cleanliness for working on automatic transmissions.
^
General repair notes.
^
Always blow compressed air through ATF cooler and ATF lines (max. 10 mbar) and replace auxiliary ATF filter before installing a replacement
transmission. If extremely dirty ATF flows out when blowing with compressed air, ATF cooler and ATF lines must also be flushed with clean
ATF.
^
When installing, insert ATF lines by hand to stop in cooler, then screw in.
Special tools, testers and auxiliary items required
^
Old oil collecting and extracting device V.A.G. 1782
Removing
-
Remove bolts - arrows -.
-
Remove air guide - 1 - and - 2 -.
-
Loosen quick-release connectors - 1 - and - 2 - and remove noise insulation.