A8 Quattro Sedan V8-4.2L (AKB) (2002)
Tip: Photo shows selector lever unit removed and serves to illustrate fitting locations:
-1- Bolt M6
-2- Locking cable
-3- Clamping piece
-4- Adjusting piece
Checking ignition key removal lock:
-
With selector lever in Park "P", switch ignition on
-
Press brake pedal and move selector lever to "D" and back to "P"
-
Switch off ignition and remove key
Tip: If ignition key cannot be removed freely, repeat adjustment procedure with next adjusting piece
Checking selector lever lock:
-
Switch off ignition and remove ignition key
-
It should not be possible to press interlock button -arrow- so far in that selector lever can be moved out of position "P".
-
If selector lever can be moved out of "P", repeat procedure with next adjusting piece
Tip: Locking effect decreases with each adjusting piece in alphabetical order (example: 4D0713299 B => C=> D=> E)
Applying locking fluid:
-
Once proper adjusting piece is identified, remove bolt -1- again, coat with locking fluid Part No. D 000 600 A2 (shop supply) and torque to 10Nm
-
Install parts in reverse order