A8 Quattro Sedan V8-4.2L (AUX) (2001)
^
Installing, Refer to Figs. 3, 4, and 5
6. Protective caps
^
Do not damage when installing piston
^
Install so that outer sealing lip goes over piston, Refer to Fig. 3
^
Install so that inner sealing lip enters groove in brake caliper housing - Fig. 4
Brake caliper piston, removing and installing
Special Tools and Equipment
^
3409 wedge
^
Brake piston resetting tool
^
G 052 150 A2 brake cylinder paste
Removing
Fig. 1 Pressing pistons from brake caliper housing using compressed air (individually)
Note:
Insert brake pad -b- in piston. Place a wooden board -a- into the recess of the caliper housing to catch the pistons so they are not damaged.
Only one piston can be pressed out at a time-hold the other piston securely in brake caliper housing using piston resetting tool.
Fig. 2 Removing sealing rings using 3409 wedge
Note: When removing, make sure that surface of cylinder is not damaged.