A8 Quattro Sedan V8-4.2L (AUX) (2001)
-
Disengage parking brake cable -3- at brake caliper.
-
Press out spring clamp -2- and remove parking brake cable rearward.
Note:
^
For Front Wheel Drive (FWD) vehicles, spring clamp -2- must face brakes with open end.
^
Do not remove bolt -1-.
-
Loosen bracket -1- and remove parking brake cable rearward from guide -2-.
-
Loosen mount -4- and -5- until parking brake cable can be removed.
-
Remove parking brake cable rearward from guide -3-.
When installing, pay particular attention to the following points:
-
Driveshaft to rear final drive, 55 Nm.
Note: Remove residual adhesive of micro encapsulation from inner threads at rear final drive.
-
Install and adjust exhaust system
-
Adjusting parking brake; Refer to Parking Brake System; Adjustments.