A8 Quattro Sedan V8-4.2L (AUX) (2001)
-
Turn tensioning lever twice at 40 Nm in direction of -arrow- to pretension toothed belt.
Note:
In the next two illustrations, depicted with torque support bracket removed, for the sake of illustration.
-
Insert a 5mm hex socket wrench flat between tensioning lever -1- and piston -2- of tensioner.
-
Tighten toothed belt by turning eccentric pulley using -T40009- and turn -V.A.G 1783- using -VAS 6234- in direction of -arrow- and hold.
^
Pretightening specification: 6Nm
-
Tighten eccentric pulley.
Note:
Make sure that the position does not change while tightening.
-
Insert -T40005- into securing plates of both camshafts.
^
Press in camshaft adjustment as far as possible.