A8 Quattro Sedan V8-4.2L (AUX) (2001)
Headlamp Igniter Module: Service and Repair
Igniter for Gas Discharge Lamps -N195-, Removing and Installation
WARNING HIGH VOLTAGE!
ALWAYS disconnect battery Ground (GND) strap before working on parts of the gas discharge headlights marked with the yellow high
voltage symbol.
Removing
-
Remove headlight.
-
Release retaining clamps and mounting units and remove rubber seal
-
Remove headlight lens -1- by removing the six retaining clamps -15-.
-
Remove ball head of adjusting motor -12- adjustment axle from ball head mount.
-
Remove reflector -4-. Turn adjustment screws for vertical and horizontal adjustment enough that reflector can be removed.
-
Open housing cover -9- and remove connector at gas discharge lamp by turning counter clockwise.
-
Remove both mounting bolts -14- and remove the igniter for gas discharge lamps -11-.
Installing
-
Complete installation in reverse order of removal.
-
Adjust headlights after installing.