A8 Quattro Sedan V8-4.2L (AUX) (2001)
Alignment: Service and Repair
Front Axle Camber, Centering
Front Axle Camber, Centering
Specifications for wheel alignment, Refer to Alignment, Specifications.
The camber cannot be adjusted!
By moving the sub-frame it is possible to center the wheel camber symmetrically within the specified tolerances.
^
Remove noise insulation tray.
^
Loosen all 4 bolts (-1- and -2-).
^
Loosen the two front bolts -1- until VAG 1926 can just be inserted between longitudinal member and subframe bushing.
^
Insert VAG 1926 so that it is as perpendicular as possible in relation to center axis of vehicle. Use setting screw to bring camber value into
specified range.
Note:
^
Insertion of VAG 1926 on left in direction of travel, permits a positive shift in the left wheel camber and a negative shift in the right wheel
camber.
^
Using the tool on the opposite side reverses the directions.
Loosen screw of special tool, check values indicated and correct if necessary.