A8 Quattro Sedan V8-4.2L (AUX) (2001)
-
Remove ATF filler plug -2-.
-
The ATF level is OK if:
There is a slight escape of fluid through the filler plug hole -2- at an ATF temperature of:
30-45°C for normal temperature regions
50°C for hot regions:
-
Install ATF filler plug -2-.
Tighten to 80 Nm (59 ft lb)
NOTE:
^
The ATF filler plug must be closed (at the latest), when the fluid reaches a temperature of 45C (for hot countries 501 C).
^
Always replace the O-ring for the ATF filler plug.
ATF Must Be Added If:
-
ATF does not escape through the hole for the ATF filler plug -2-, even though the correct ATF temperature has been reached.
-
Add ATF using filler nozzle from VAG 1924, until excess ATF escapes through hole for ATF filler plug -2-.
NOTE: The filler nozzle must be introduced into one of the openings of the oil scraper cap -4-, which is installed above the filler hole.
CAUTION:
^
Do not push the filler nozzle to the top.
^
Otherwise, the oil cap could spring off.
-
Install ATF filler plug -2-.
Tighten to 80 Nm (59 ft lb)
-
Press arrow button.
-
Press buttons -0- and -6- to select "End Output" function 06.
-
Press -Q- button to confirm input.