A8 Quattro Sedan V8-4.2L (AUX) (2001)
Evaporative Emission Control Canister: Service and Repair
NOTE: Check seal integrity; perform tank leak diagnosis, refer to "EVAP System, Automatic Leak Testing" See: Testing and Inspection
Removing
-
Remove cover for EVAP canister at bottom of (below) spare tire well -arrows-.
-
Loosen hose connections 1 to 3 on vent lines.
-
Loosen studs -arrows-.
Installing
Installation is performed in the reverse order of removal, during installation note the following:
CAUTION!
Always refer to the latest parts catalog to ensure that you use original equipment fuel hose clamps.
Tightening torque
Component
Nm
EVAP canister on body
16
Cover on spare wheel well
9