A8 Quattro Sedan V8-4.2L (AUX) (2001)
-
Pry fresh air intake grid up to remove Phillips head screws from rear of cover -right arrow-.
-
Remove rest of screws.
-
Remove E-box cover.
-
Disengage locking lugs and disconnect harness connectors from Engine Control Module (ECM).
NOTE: The connector for the ECM can only be disconnected or connected with the ignition switched off
-
Connect VAG1598/31 test box to multi-pin harness connectors. The Ground (GND) clip must be clipped to Ground (GND). The ECM must not
be attached.