A8 Quattro Sedan V8-4.2L (AUX) (2001)
Seat Occupant Sensor: Service and Repair
Front Occupied Seat Sensor on Sport Seat, Removing and Installing
Front Occupied Seat Sensor On Sport Seat, Removing And Installing
Removing
CAUTION: Note safety measures when working on airbag.
-
For vehicles with coded radio unit, radio/navigation system (RNS) note coding; ask if necessary.
-
Disconnect battery ground strap/cable and cover negative pole.
-
Remove front seat.
-
Removing seat cover.
-
Cut through cable ties - 2 -.
-
Remove connector - 1 - for occupied seat sensor and seat heater and disconnect.
-
Remove seat cushion with sensor mat and seat heater.
NOTES:
-
Sensor mat for occupied seat sensor is available as replacement part only in connection with seat heater and seat cushion.
-
Sensor mat is in two parts due to removable femur support.
Installing
Installation is done in reverse sequence, noting the following:
CAUTION: Sensor mat must not be creased, otherwise mat will malfunction.
-
After installation, check function of sensor mat.
CAUTION: Note instructions when installing seat.