A8 Quattro Sedan V8-4.2L (AUX) (2001)
/Page-1444001.png)
Alignment: Service and Repair
Rear Axle Camber, Adjusting
Rear Axle Camber, Adjusting
Wheel alignment specifications, Refer to Alignment, Specifications.
^
Remove nut of bolted joint between wheel bearing housing and transverse link -A-.
^
Set camber by turning eccentric bolt -B-.
Notes:
^
The maximum adjustment range is 90° to the left or right of the center position.
^
For ease of illustration the picture shows camber adjustment with wheel removed.
^
Camber must be checked again after tightening nut -A-.