A8 Quattro Sedan V8-4.2L (AUX) (2001)
![background image](/audi/a8_quattro_sedan/v8-4.2l_(aux)/Page-1541004.png)
^
The lower spring support has a groove.
^
This groove is to be inserted in the lug at the trapezium link.
^
Turn end of coil spring until it makes contact with lower spring support.
^
Then turn upper spring support (not shown) until it makes contact with top end of spring.
^
Slacken off spring.
^
Bolt brake shield and brake caliper to wheel bearing housing
^
Tighten collar bolt to 190 Nm (140 ft. lbs.) plus additional 180° turn.
WARNING! To reduce the risk of accident, vehicle must be standing on its wheels when loosening and tightening collar bolt.
Note:
^
Wheel alignment, Refer to Alignment, Description and Operation.