A8 Quattro Sedan V8-4.2L (AUX) (2001)
Stabilizer Bushing: Service and Repair
Front
Removal
-
Remove special ribbed nuts -1-, and coupling.
-
Remove bolts -2-.
Installation
-
Tightening torques:
Ribbed nuts -1-:
Upper, tighten to: 90 Nm (66 ft lb)
Lower, tighten to: 70 Nm (52 ft lb)
Bolts -2-, tighten to: 20 Nm (15 ft lb)
NOTE: Clean adhesive from threads of any nuts used with self-locking bolts.
-
Install bushing and stabilizer without grease.